Evolis Pebble Manual do Utilizador descarregar pdf (Página 68)

EVOLIS CARD PRINTER

Evolis Printers Programming Guide Page 68

Part Number: A5013 Rev. E

20 – Output Hopper Command Definition

S – Sequence Commands

Sds;?p1;o1 (Sequence discuss with output hopper )

Tattoo

New Pebble

Dualys

Quantum

Kiosk

Sends command to the Output Hopper and return the answer.

p1: A Auto adjust the hopper sensor (remove card and close the doors before processing)

v Return the firmware version.

i Init the output hopper

p2: 1 return detailed answer ([ACK] ..[NACk]..[EOT]

Possible answers:

‘T’ : error timeout.

‘1’ : error command.

‘0’ : OK or ACK

For adjustment only:

49 : can not adjust the blue belt position.

50 : can not adjust the door sensors and/or position 1 sensor.

51 : can not adjust the ejection sensors.

52 : can not adjust the position 2 sensor.

Example:

(ESC)Sds;?A;1(CR) 6 Adjustment correct

(ESC)Sds;?A;1(CR) 52 Cannot adjust the ejection sensors.

1 2 ... 63 64 65 66 67 68 69

Sem comentários

Evolis Pebble Manual do Utilizador Página 68