Evolis Pebble Manual do Utilizador descarregar pdf (Página 3)

EVOLIS CARD PRINTER

Evolis Printers Programming Guide Page 3

Part Number: A5013 Rev. E

1. Communication Interface

The printer uses by default a standard parallel with a Centronics cable wiring as described below:

Pin number

Signal

Direction

1 STROBE IN

2 Data 0 IN

3 Data 1 IN

4 Data 2 IN

5 Data 3 IN

6 Data 4 IN

7 Data 5 IN

8 Data 6 IN

9 Data 7 IN

10 ACK OUT

11 BUSY OUT

12 PAPER-END OUT

13 SELECT OUT

14 AUTO-FEED IN

31 INIT IN

32 FAULT OUT

36 SELECT IN IN

19-30 Ground #

The communication is standard using the 8 data entries (DATA0 to DATA7) as well as the BUSY and

STROBE signals.

The INIT signal of the Centronics allows resetting the printer.

Error Cases:

1- All the minor errors (syntax error, command errors) will not be reported to the printer.

2- The media errors (No cards or End of Ribbon) will be reported via the BUSY and PAPER-END signals.

3- The mechanical errors (jam or other) will be reported via the BUSY and FAULT signals.

Information from the printer:

The printer is able to return a string of characters using the NIBBLE protocol mode.

1 2 3 4 5 6 7 8 ... 68 69

Sem comentários

Evolis Pebble Manual do Utilizador Página 3