Evolis Avansia Guia do Utilizador descarregar pdf (Página 53)

Correcting card curl

Switch from Normal Mode to User Mode (see section 4-1b)

Press the t key until [Card Setup] is diplayed. Then press the SET Key.

Press the t key until [Decurl Time(s)] is diplayed. Then press the SET Key.

Change the settings by using the / Keys. You can set the decurl duration from 0-5 seconds. There is no decurl if the

settings

value is set to «0».

Press the SET Key to x the changes.

The factory default setting is «0».

You can also change the settings by using the printer driver.

Secondary transfer conditions that have not been optimized and application of excess heat are major causes

of cards curling after printing. Please adjust the secondary transfer conditions.

Ready Ready

Printer Info.

SET:

Printer Info.

SET:

Normal Mode User Mode

Printer Info.

SET:>>

Printer Info.

SET:>>

Card Setup

SET:>>

Card Setup

SET:>>

Card Type Card Type

SET

Card Type

Decurl Time(s)

SET

Decurl Time(s)

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 80 81

Sem comentários

Evolis Avansia Guia do Utilizador Página 53